High-frequency Electromagnetic Activated Water Treatment

Microcomputer control system with 7HMI human-machine interface 
(panel protection grade IP65)
User-friendly control：
Text graphics control mode, simple and convenient, users can touch the screen
Achieve operational or set objectives and provide graphical operational information.

Safety rating system:
Password control for different operators to set or modify parameter values permissions ( sub users and maintainers) to ensure the safety of the system operation.

Run the set：
Operating date and time can be selected through the interface. The minimum unit is minutes, which meets the owner's requirement. Actual operation status of water distribution system.

Intelligent output：
Automatically adjust the operating power according to the water quality conditions, effectively adsorb water ions and release negative ions。Remove scale from cooling tower cooling material and cooling circulating water.

Automatic Drain：
Remove scale and suspended matter to reach the set standard, start automatic sewage system, effectively remove scale and suspended matter in water

Maintenance Instructions：
The scale adsorption saturation of the adsorber reaches the set standard, the system shows cleaning and maintenance, and the operator is timely
Maintain and clean, ensure high frequency electromagnetic water treatment run optimally.

Abnormal Shutdown：
If the host load exceeds or the system is abnormal, it will automatically display the maintenance stop and the system will stop running
Special personnel for maintenance.

Potions configuration：
According to the state of cooling water quality, judge whether it is necessary to add bactericidal and algal removal agent, and choose the date of dosing
(weekly) and time, minimum unit for minutes, start the sterilizing and removing algae dosing pump (optional - not necessary
Sex) to prevent the growth of bacteria and reduce unnecessary drug delivery.

Equipment according to instructions

The owner shall provide single-phase 220V 3-wire cable power supply to the installation site of the equipment. The cable shall be grounded with a diameter of 3.5mm squared.

Install the main engine and sewage system by the service specialist, and put the scale absorber into the water table of the cooling tower.

According to the previous water quality analysis data, the service specialist will set the operating parameters of the main engine and turn on the power switch system.

After installation, the host system can automatically adjust operation and sewage discharge according to water quality and adsorption conditions

Please clean the sediment, algae (moss) and corrosion dirt at the bottom of the cooling tower chassis or storage tank first to discharge the waste water. Inject clean water to normal circulating water level of cooling tower or storage tank, and put scale absorber in front of suction port of storage tank. Please read the instructions carefully before operation and follow the instructions Turn on the high frequency electromagnetic activated water main engine operating switch "for cooling circulating water treatment program The service commissioner should be on site regularly to replace the scale absorber, and conduct sampling and testing of the water quality and submit the water quality test report

Remark: After the special water quality is tested, the service specialist will apply the bactericidal and algal reducing agent according to the actual demand to inhibit the growth of green algae.